Gerbers, ODB++ or IPC-2581: What Files a UK PCB Manufacturer Needs
Buyer Guides · 9 November 2026

A PCB quote moves only as fast as the data behind it. When a file is missing or a note is unclear, the manufacturer's CAM engineer has to stop and ask, and your lead time waits with them. This guide sets out the files a UK PCB manufacturer needs to quote and build a bare board first time, what each of the three main data formats carries, and what to put in the fabrication notes.
Three ways to send the same board
Most manufacturers accept design data in one of three forms:
- Gerber: a set of files, one per layer image, sent with drill data, a fabrication drawing and a netlist.
- ODB++: a single structured job that holds layers, drills, netlist, components and stack-up together.
- IPC-2581: an open XML standard that also carries the whole design in one package.
None of them is wrong. The best choice is the one your CAD tool exports cleanly and your manufacturer reads without conversion, so ask which they prefer before you export.
Gerber: the most widely used format
Gerber is published by Ucamco, which makes the specification free to download. Each Gerber file describes one two-dimensional image: a copper layer, the solder mask, the legend or the board outline.
Three points from the specification are worth knowing:
- Export Extended Gerber (RS-274X). Ucamco has revoked the old Standard Gerber (RS-274-D), and files in that format do not conform to the specification.
- Ask for Gerber X2. X2 files carry attributes that say what each file is (for example, the top solder mask) and what each object is (a via pad or a component pad). That saves the CAM engineer working it out by hand. Gerber X3 adds component data for assembly.
- Send the outline as its own file. Ucamco requires a separate profile file in fabrication data, with all files aligned at the same scale and orientation, sent in a folder or a zip file.
Ucamco recommends sending drill and rout data as Gerber too, with plated and non-plated holes in separate files and each drill span (for blind and buried vias) in its own file. If your CAD tool writes drill files in an NC format, check which one your manufacturer accepts.
ODB++: one structured job
ODB++ is a format published by Siemens. An ODB++ job is a directory tree, often sent as a single archive, that holds the layers, drill tools, the CAD netlist, component and bill of materials data and, optionally, a stack-up file. Because everything travels together, there are fewer separate files to keep in step when the design changes.
IPC-2581: the open, single-package standard
IPC-2581 is an IPC standard for transferring printed board manufacturing data. The IPC-2581 Consortium describes it as open and neutrally maintained, and says it contains everything a Gerber set does, including images for all layers, drills, the netlist, the bill of materials and the stack-up. It suits teams that want one file for fabrication and assembly without tying it to a single software supplier.
The file checklist
Whichever format you send, check the package covers:
- Copper layers, named or attributed in order from top to bottom, plus solder mask and legend for each side.
- The board outline as its own file, with any cut-outs and slots.
- Drill files, plated and non-plated separately, one file per span for blind or buried vias, with finished hole sizes.
- A fabrication drawing (PDF) with outline dimensions and tolerances, a hole table, the layer order and your fabrication notes.
- The stack-up: layer count, materials, copper weights, dielectric thicknesses and finished thickness.
- A netlist. IPC-D-356 is the common format for bare board electrical test data. With it, the manufacturer tests your boards against your design rather than against a netlist rebuilt from your images.
- Panel requirements, if you need boards delivered in an array for assembly.
- A short readme listing every file and what it contains.
If you send ODB++ or IPC-2581, most of items 1 to 6 are inside the package. A fabrication drawing is still useful for tolerances and notes.
What to put in the fabrication notes
The notes turn a set of images into a manufacturing instruction. Include:
- Base material, glass transition temperature (Tg) if it matters, finished thickness and tolerance
- Copper weights for outer and inner layers
- Surface finish, for example ENIG, immersion silver, OSP or lead-free HASL
- Solder mask and legend colours
- Controlled impedance: the layers and track widths involved, target values and tolerance
- The performance class you need under IPC-6012, the IPC qualification and performance specification for rigid printed boards
- Via treatment, such as tented, plugged or filled, using the IPC-4761 via types if you know them
- Electrical test, marking (date code, part number) and any packing requirements
- Quantity, delivery date and whether the manufacturer may adjust the stack-up to suit its stocked materials
Questions to ask before you send data
- Which data format do you prefer, and which Gerber version?
- Do you want a netlist, and in which format?
- Will you propose a stack-up from your stocked materials, or build to ours?
- How will you raise engineering queries, and will work start before they are answered?
- Will you panelise the boards, or should we supply the panel design?
A first quote that comes back with no queries is usually a sign the data package is complete. Keep the same package as a template for the next design.
Where to go for more
Ucamco publishes the Gerber specification and a free reference viewer. The IPC-2581 Consortium explains the IPC-2581 standard, and IPC publishes IPC-6012 and the wider family of printed board standards. The ODB++ site covers the ODB++ formats.
Find PCB manufacturers on PCB Directory
Browse prototype and fast-turn PCBs, rigid PCBs and HDI PCBs. Save the manufacturers that fit to your shortlist and send one enquiry, with your data package, to the whole shortlist at once. Our guide from prototype to production covers what to ask as your volumes grow.
For press enquiries about PCB Directory, contact pcb@pcbdirectory.co.uk.
Listings related to this article

Amphenol Invotec Ltd
Telford, Shropshire
From two UK sites, in Tamworth and Telford, Amphenol Invotec Ltd manufactures rigid, flex and flex-rigid printed circuit boards, including HDI constructions. It holds AS9100, ISO 9001, ISO 45001, UL, JOSCAR and Cyber Essentials certification, plus Nadcap accreditation at both facilities. The company supplies aerospace and defence, space, industrial, telecommunications and automotive customers, and offers flex assembly alongside its PCB fabrication business. It has traded as Amphenol Invotec since becoming part of Amphenol Corporation in 2015.
- Rigid
- Flexible
- Rigid-Flex
- HDI
Exception PCB
Tewkesbury, Gloucestershire
Exception PCB is a UK printed circuit board manufacturer based in Tewkesbury, Gloucestershire. Founded in 1977 and now part of the Connexion Technologies group, it produces multilayer, flex, rigid-flex, HDI, RF and hybrid boards, with quick-turn, prototype and low-volume manufacture, copper and resin via fill, design-for-manufacture review and 100% electrical test. The company is certified to AS9100D (EN9100:2018) and ISO 9001:2015, holds JOSCAR registration and Cyber Essentials certification, and supplies customers in aerospace, defence, space, automotive and transport, communications, energy and industrial, medical and motorsport.
- Rigid
- Flexible
- Rigid-Flex
- HDI

Graphic PLC
Crediton, Devon
Graphic PLC manufactures high-density interconnect, flex-rigid and multilayer rigid printed circuit boards up to 32 layers from its Crediton, Devon facility, part of the SOMACIS Group. The company holds AS9100, ISO 14001, ISO 45001, UL recognition and JOSCAR registration, and offers sequential build-up, advanced via technologies and applications engineering support from prototype through offshore volume production. It supplies aerospace, defence, space, medical and industrial customers requiring high-reliability bare-board fabrication.
- Rigid
- Flexible
- Rigid-Flex
- HDI

GSPK Circuits Ltd
Boroughbridge, North Yorkshire
GSPK Circuits is a printed circuit board manufacturer in Boroughbridge, North Yorkshire. It is certified to IATF 16949, AS9100, ISO 13485, ISO 14001 and ISO 9001:2015 and is JOSCAR registered. Boards are made in single-sided, double-sided and multilayer form in rigid, flexible, rigid-flex, HDI, ceramic, metal-backed and heavy copper constructions, with fast-turn prototypes in 48 hours to 3 days, in-house testing and design-for-manufacture engineering support. Low- and medium-volume orders are made in the UK, and high-volume work goes through partner factories overseas with UK quality oversight.
- Flexible
- Rigid
- Hybrid
- HDI

PCB RUNNER Limited
Esher, Surrey
PCB Runner is a PCB fabricator and assembler in Esher, Surrey, holding ISO 9001:2015, ISO 13485:2016 and ISO 14001:2015 certification and JOSCAR accreditation, with workmanship to IPC A-600 and A-610. It works across rigid, flexible, rigid-flex, HDI and metal-based boards, from quick-turn prototypes through to high-volume runs. Testing includes AOI, X-ray, in-circuit, functional and flying probe. Turnkey, partial-turnkey and consigned assembly, conformal coating and box build are also offered, for aerospace and defence, medical, automotive, consumer electronics, industrial, lighting and telecom customers.
- Rigid
- Flexible
- Rigid-Flex
- Hybrid

Quick Circuits Ltd
Reading, Berkshire
Quick Circuits manufactures PCBs at its site in Reading and also provides in-house population and assembly, giving customers a single order, invoice and supplier from board fabrication to finished assembly. It covers prototype, fast-turn, low- and medium-volume work on rigid and HDI boards of up to 36 layers, with drilling and testing that includes automated optical inspection, X-ray and flying probe. Box build, cable assembly and rework are also offered. The company is certified to ISO 9001:2015, UL, RoHS and REACH.
- Rigid
- HDI