Get listed Shortlist

PCB Glossary

A plain-English guide to the board types, processes, tests and acronyms you'll see across listings on this directory, useful whether you're sourcing a manufacturer for the first time or double-checking what a quote or drawing actually means.

General terms

Term What it means
PCB (printed circuit board) A board that connects electronic components with copper tracks etched onto an insulating base.
Bare board A finished circuit board with no components fitted. Also called a fabricated board.
Fabrication Making the bare board: laminating, imaging and etching copper, drilling, plating, applying solder mask and finish, and routing to shape.
Assembly (PCBA) Fitting components onto a bare board to make a working circuit assembly. See EMS Directory for UK assembly companies.
Prototype A single board or a very small number made to prove a design before production. See Prototype & Fast-Turn PCBs manufacturers.
Fast turn Boards made on a short lead time, usually at a premium.
Production run Repeat manufacture of the same board in medium to high volume.
Layer count The number of copper layers in a board. More layers allow denser circuits.
Stack-up The order, thickness and material of the copper and insulating layers that make up a board.
DFM (Design for Manufacture) Review of a board design to find features that would make it difficult, unreliable or expensive to make, before production starts.
Panel / panelisation Arranging several boards on one larger sheet so they can be made and assembled together, and separated afterwards.

Board types

Type What it means
Rigid board A board on a stiff base material, most often glass-reinforced epoxy (FR-4). The standard choice for most electronics. See Rigid PCBs manufacturers.
Flexible board (flex) A circuit on thin polyimide film that can bend or fold. See Flex & Rigid-Flex PCBs manufacturers.
Rigid-flex A board that combines rigid sections and flexible layers in one piece, removing connectors between boards.
HDI (High-Density Interconnect) A board with finer tracks, smaller vias and often built up in stages, so more connections fit in a smaller area. See HDI PCBs manufacturers.
Metal-core (IMS) board A board with a metal base, usually aluminium, bonded to the circuit through a thin insulating layer to spread heat. Common in LED lighting and power electronics. See Metal-Core & Ceramic PCBs manufacturers.
Ceramic board A board on a ceramic material such as alumina or aluminium nitride, used where high temperature, high thermal conductivity or stable RF behaviour is needed.
Hybrid board A board that combines different base materials in one construction.
Single-sided / double-sided A board with copper on one side or on both sides.

Materials and construction

Term What it means
FR-4 The most common rigid laminate, made of woven glass fibre in epoxy resin.
Polyimide A heat-resistant film used as the base of flexible circuits.
Tg (glass transition temperature) The temperature at which a laminate starts to soften. A higher Tg suits higher operating or assembly temperatures.
Copper weight The thickness of the copper layer, usually stated in ounces per square foot. Heavier copper carries more current.
Track and gap The width of a copper track and the space between neighbouring tracks. Finer track and gap needs a more capable process.
Via A plated hole that connects copper layers. Through-hole vias pass through the whole board, blind vias connect an outer layer to an inner layer, and buried vias connect inner layers only.
Microvia A very small via, usually laser-drilled, used in HDI boards.
Solder mask The coloured coating, usually green, that covers the copper except where components are soldered.
Legend / silkscreen Printed text and symbols on the board that identify components and orientation.
Surface finish The coating on exposed copper that keeps it solderable. Common finishes are HASL (hot air solder levelling), ENIG (electroless nickel immersion gold), immersion tin or silver, and OSP (organic solderability preservative).
Controlled impedance Designing and making tracks so that their electrical impedance matches a target value, important for high-speed and RF signals.
Drilling Making holes in the board. See PCB Drilling & Routing manufacturers.
Routing / depanelling Cutting the board to shape, or separating boards from a panel, by milling or scoring.

Design data

Term What it means
Gerber files The standard files that describe each layer of a board for manufacture: copper, solder mask, legend and outline.
Drill file A file that gives the position and size of every hole.
ODB++ / IPC-2581 Single-package data formats that carry layers, drill data and stack-up together, as an alternative to separate Gerber files.
Netlist (IPC-D-356) A list of which points on the board should be connected, used to check the finished board electrically.
Fabrication drawing A drawing that states the materials, stack-up, finish, tolerances and special requirements for a board.
PCB design Laying out a circuit as a board. See PCB Design & Reverse Engineering suppliers.
PCB reverse engineering Recreating the design data of an existing board, for example for an obsolete product.

Testing and inspection

Test What it means
Bare board electrical test Testing a finished board for correct connections and for shorts between tracks. See Bare Board Testing manufacturers.
Flying probe test Electrical testing with moving probes and no special fixture, suited to prototypes and low volumes.
Fixture (bed-of-nails) test Electrical testing with a purpose-made fixture. It costs more to set up and is quicker per board, so it suits higher volumes.
Impedance testing Measuring the impedance of tracks, often on test coupons, to confirm it meets the target.
Microsection Cutting and polishing a sample from a board or coupon to inspect the layers, plating and holes under a microscope.
AOI (Automated Optical Inspection) A camera system that checks a board for defects against the design.
X-ray inspection Using X-rays to see inside a board or assembly, for example internal layers or hidden solder joints.
In-circuit test (ICT) Testing an assembled board by contacting points on it to check components and connections.
Functional test Powering an assembled board and checking it does what it should.
Boundary scan A test method that uses built-in test circuitry in components to check connections.
Burn-in Running assembled boards under stress, for example heat, for a period to find early failures.

Standards and certification

Term What it means
IPC The global industry association whose standards define how boards are designed, made and accepted.
IPC-A-600 The standard for the acceptability of printed boards: what a good, acceptable or defective board looks like.
IPC-6012 The standard for the qualification and performance of rigid printed boards.
IPC Class 1, 2 and 3 Levels of quality and reliability in IPC standards: Class 1 for general products, Class 2 for dedicated service products and Class 3 for high-reliability products.
IPC-A-610 The standard for the acceptability of assembled boards. It applies to assembly, not to bare boards.
IPC J-STD-001 The standard for soldering requirements for electrical and electronic assemblies.
UL recognition A programme in which Underwriters Laboratories evaluates a board, for example for flammability, so it can be used in products that need UL approval.
RoHS Rules restricting the use of certain hazardous substances in electrical and electronic products.
REACH Rules on the registration and control of chemicals and substances of concern.
ISO 9001 The international standard for quality management systems, applying to any sector.
AS9100 The quality management standard for the aerospace, space and defence sector, building on ISO 9001.
ISO 13485 The quality management standard for medical device manufacturing.
ISO 14001 The international standard for environmental management systems.
Cyber Essentials A UK government-backed scheme, run by the National Cyber Security Centre, that certifies basic cyber security controls.
JOSCAR A supplier register used to pre-qualify suppliers to the aerospace, defence and security sector. It is a register, not a quality standard.
Nadcap An industry accreditation programme for special processes and products in aerospace and defence.
Certificate of conformance (CoC) A document from the supplier stating that the boards supplied meet the specification and order.